曾与蒿藜同雨露,한때 잡초와 쑥과 함께 비와 이슬을 나누던 곳이 이제는 소나무와 삼나무와 함께 서리와 눈을 견뎌내고 있다.终随松柏到冰霜.かつては雑草やヨモギと共に雨や露を分かち合っていたが、今では松やヒノキと共に霜や雪に耐えている。曾与蒿藜同雨露,Once sharing rain and dew with weeds and wormwood, now enduring frost and snow with pines and cypresses.终随松柏到冰霜.曾与蒿藜同雨露한때 잡초와 쑥과 함께 비와 이슬을 나누던 곳이 이제는 소나무와 삼나무와 함께 서리와 눈을 견뎌내고 있다.,终随松柏到冰霜.譖セ荳手珍阯懷酔髮ィ髴イ�檎サ磯囂譚セ譟丞芦蜀ー髴�曾与蒿藜同雨露,鏇句笌钂胯棞鍚岄洦闇诧紝缁堥殢鏉炬煆鍒板啺闇�终随松柏到冰霜.曾与蒿藜同雨露,한때 잡초와 쑥과 함께 비와 이슬을 나누던 곳이 이제는 소나무와 삼나무와 함께 서리와 눈을 견뎌내고 있다.终随松柏到冰霜.曾与蒿藜同雨露,终随松柏到冰霜.
IPV6-TC DEFINITIONS ::= BEGIN
IMPORTS
Integer32 FROM SNMPv2-SMI
TEXTUAL-CONVENTION FROM SNMPv2-TC;
-- definition of textual conventions
Ipv6Address ::= TEXTUAL-CONVENTION
DISPLAY-HINT "2x:"
STATUS current
DESCRIPTION
"This data type is used to model IPv6 addresses.
This is a binary string of 16 octets in network
byte-order."
SYNTAX OCTET STRING (SIZE (16))
Ipv6AddressPrefix ::= TEXTUAL-CONVENTION
DISPLAY-HINT "2x:"
STATUS current
DESCRIPTION
"This data type is used to model IPv6 address
prefixes. This is a binary string of up to 16
octets in network byte-order."
SYNTAX OCTET STRING (SIZE (0..16))
Ipv6AddressIfIdentifier ::= TEXTUAL-CONVENTION
DISPLAY-HINT "2x:"
STATUS current
DESCRIPTION
"This data type is used to model IPv6 address
interface identifiers. This is a binary string
of up to 8 octets in network byte-order."
SYNTAX OCTET STRING (SIZE (0..8))
Ipv6IfIndex ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"A unique value, greater than zero for each
internetwork-layer interface in the managed
system. It is recommended that values are assigned
contiguously starting from 1. The value for each
internetwork-layer interface must remain constant
at least from one re-initialization of the entity's
network management system to the next
re-initialization."
SYNTAX Integer32 (1..2147483647)
Ipv6IfIndexOrZero ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"This textual convention is an extension of the
Ipv6IfIndex convention. The latter defines
a greater than zero value used to identify an IPv6
interface in the managed system. This extension
permits the additional value of zero. The value
zero is object-specific and must therefore be
defined as part of the description of any object
which uses this syntax. Examples of the usage of
zero might include situations where interface was
unknown, or when none or all interfaces need to be
referenced."
SYNTAX Integer32 (0..2147483647)
END