曾与蒿藜同雨露,한때 잡초와 쑥과 함께 비와 이슬을 나누던 곳이 이제는 소나무와 삼나무와 함께 서리와 눈을 견뎌내고 있다.终随松柏到冰霜.かつては雑草やヨモギと共に雨や露を分かち合っていたが、今では松やヒノキと共に霜や雪に耐えている。曾与蒿藜同雨露,Once sharing rain and dew with weeds and wormwood, now enduring frost and snow with pines and cypresses.终随松柏到冰霜.曾与蒿藜同雨露한때 잡초와 쑥과 함께 비와 이슬을 나누던 곳이 이제는 소나무와 삼나무와 함께 서리와 눈을 견뎌내고 있다.,终随松柏到冰霜.譖セ荳手珍阯懷酔髮ィ髴イ�檎サ磯囂譚セ譟丞芦蜀ー髴�曾与蒿藜同雨露,鏇句笌钂胯棞鍚岄洦闇诧紝缁堥殢鏉炬煆鍒板啺闇�终随松柏到冰霜.曾与蒿藜同雨露,한때 잡초와 쑥과 함께 비와 이슬을 나누던 곳이 이제는 소나무와 삼나무와 함께 서리와 눈을 견뎌내고 있다.终随松柏到冰霜.曾与蒿藜同雨露,终随松柏到冰霜.
"""Test cases for traceback module"""
from io import StringIO
import sys
import unittest
import re
from test.support import run_unittest, Error, captured_output
from test.support import TESTFN, unlink, cpython_only
import traceback
class SyntaxTracebackCases(unittest.TestCase):
# For now, a very minimal set of tests. I want to be sure that
# formatting of SyntaxErrors works based on changes for 2.1.
def get_exception_format(self, func, exc):
try:
func()
except exc as value:
return traceback.format_exception_only(exc, value)
else:
raise ValueError("call did not raise exception")
def syntax_error_with_caret(self):
compile("def fact(x):\n\treturn x!\n", "?", "exec")
def syntax_error_with_caret_2(self):
compile("1 +\n", "?", "exec")
def syntax_error_bad_indentation(self):
compile("def spam():\n print(1)\n print(2)", "?", "exec")
def syntax_error_with_caret_non_ascii(self):
compile('Python = "\u1e54\xfd\u0163\u0125\xf2\xf1" +', "?", "exec")
def syntax_error_bad_indentation2(self):
compile(" print(2)", "?", "exec")
def test_caret(self):
err = self.get_exception_format(self.syntax_error_with_caret,
SyntaxError)
self.assertEqual(len(err), 4)
self.assertTrue(err[1].strip() == "return x!")
self.assertIn("^", err[2]) # third line has caret
self.assertEqual(err[1].find("!"), err[2].find("^")) # in the right place
err = self.get_exception_format(self.syntax_error_with_caret_2,
SyntaxError)
self.assertIn("^", err[2]) # third line has caret
self.assertEqual(err[2].count('\n'), 1) # and no additional newline
self.assertEqual(err[1].find("+"), err[2].find("^")) # in the right place
err = self.get_exception_format(self.syntax_error_with_caret_non_ascii,
SyntaxError)
self.assertIn("^", err[2]) # third line has caret
self.assertEqual(err[2].count('\n'), 1) # and no additional newline
self.assertEqual(err[1].find("+"), err[2].find("^")) # in the right place
def test_nocaret(self):
exc = SyntaxError("error", ("x.py", 23, None, "bad syntax"))
err = traceback.format_exception_only(SyntaxError, exc)
self.assertEqual(len(err), 3)
self.assertEqual(err[1].strip(), "bad syntax")
def test_bad_indentation(self):
err = self.get_exception_format(self.syntax_error_bad_indentation,
IndentationError)
self.assertEqual(len(err), 4)
self.assertEqual(err[1].strip(), "print(2)")
self.assertIn("^", err[2])
self.assertEqual(err[1].find(")"), err[2].find("^"))
err = self.get_exception_format(self.syntax_error_bad_indentation2,
IndentationError)
self.assertEqual(len(err), 4)
self.assertEqual(err[1].strip(), "print(2)")
self.assertIn("^", err[2])
self.assertEqual(err[1].find("p"), err[2].find("^"))
def test_base_exception(self):
# Test that exceptions derived from BaseException are formatted right
e = KeyboardInterrupt()
lst = traceback.format_exception_only(e.__class__, e)
self.assertEqual(lst, ['KeyboardInterrupt\n'])
def test_format_exception_only_bad__str__(self):
class X(Exception):
def __str__(self):
1/0
err = traceback.format_exception_only(X, X())
self.assertEqual(len(err), 1)
str_value = '<unprintable %s object>' % X.__name__
if X.__module__ in ('__main__', 'builtins'):
str_name = X.__name__
else:
str_name = '.'.join([X.__module__, X.__name__])
self.assertEqual(err[0], "%s: %s\n" % (str_name, str_value))
def test_without_exception(self):
err = traceback.format_exception_only(None, None)
self.assertEqual(err, ['None\n'])
def test_encoded_file(self):
# Test that tracebacks are correctly printed for encoded source files:
# - correct line number (Issue2384)
# - respect file encoding (Issue3975)
import tempfile, sys, subprocess, os
# The spawned subprocess has its stdout redirected to a PIPE, and its
# encoding may be different from the current interpreter, on Windows
# at least.
process = subprocess.Popen([sys.executable, "-c",
"import sys; print(sys.stdout.encoding)"],
stdout=subprocess.PIPE,
stderr=subprocess.STDOUT)
stdout, stderr = process.communicate()
output_encoding = str(stdout, 'ascii').splitlines()[0]
def do_test(firstlines, message, charset, lineno):
# Raise the message in a subprocess, and catch the output
try:
output = open(TESTFN, "w", encoding=charset)
output.write("""{0}if 1:
import traceback;
raise RuntimeError('{1}')
""".format(firstlines, message))
output.close()
process = subprocess.Popen([sys.executable, TESTFN],
stdout=subprocess.PIPE, stderr=subprocess.STDOUT)
stdout, stderr = process.communicate()
stdout = stdout.decode(output_encoding).splitlines()
finally:
unlink(TESTFN)
# The source lines are encoded with the 'backslashreplace' handler
encoded_message = message.encode(output_encoding,
'backslashreplace')
# and we just decoded them with the output_encoding.
message_ascii = encoded_message.decode(output_encoding)
err_line = "raise RuntimeError('{0}')".format(message_ascii)
err_msg = "RuntimeError: {0}".format(message_ascii)
self.assertIn(("line %s" % lineno), stdout[1],
"Invalid line number: {0!r} instead of {1}".format(
stdout[1], lineno))
self.assertTrue(stdout[2].endswith(err_line),
"Invalid traceback line: {0!r} instead of {1!r}".format(
stdout[2], err_line))
self.assertTrue(stdout[3] == err_msg,
"Invalid error message: {0!r} instead of {1!r}".format(
stdout[3], err_msg))
do_test("", "foo", "ascii", 3)
for charset in ("ascii", "iso-8859-1", "utf-8", "GBK"):
if charset == "ascii":
text = "foo"
elif charset == "GBK":
text = "\u4E02\u5100"
else:
text = "h\xe9 ho"
do_test("# coding: {0}\n".format(charset),
text, charset, 4)
do_test("#!shebang\n# coding: {0}\n".format(charset),
text, charset, 5)
do_test(" \t\f\n# coding: {0}\n".format(charset),
text, charset, 5)
# Issue #18960: coding spec should has no effect
do_test("0\n# coding: GBK\n", "h\xe9 ho", 'utf-8', 5)
class TracebackFormatTests(unittest.TestCase):
def some_exception(self):
raise KeyError('blah')
@cpython_only
def check_traceback_format(self, cleanup_func=None):
from _testcapi import traceback_print
try:
self.some_exception()
except KeyError:
type_, value, tb = sys.exc_info()
if cleanup_func is not None:
# Clear the inner frames, not this one
cleanup_func(tb.tb_next)
traceback_fmt = 'Traceback (most recent call last):\n' + \
''.join(traceback.format_tb(tb))
file_ = StringIO()
traceback_print(tb, file_)
python_fmt = file_.getvalue()
# Call all _tb and _exc functions
with captured_output("stderr") as tbstderr:
traceback.print_tb(tb)
tbfile = StringIO()
traceback.print_tb(tb, file=tbfile)
with captured_output("stderr") as excstderr:
traceback.print_exc()
excfmt = traceback.format_exc()
excfile = StringIO()
traceback.print_exc(file=excfile)
else:
raise Error("unable to create test traceback string")
# Make sure that Python and the traceback module format the same thing
self.assertEqual(traceback_fmt, python_fmt)
# Now verify the _tb func output
self.assertEqual(tbstderr.getvalue(), tbfile.getvalue())
# Now verify the _exc func output
self.assertEqual(excstderr.getvalue(), excfile.getvalue())
self.assertEqual(excfmt, excfile.getvalue())
# Make sure that the traceback is properly indented.
tb_lines = python_fmt.splitlines()
self.assertEqual(len(tb_lines), 5)
banner = tb_lines[0]
location, source_line = tb_lines[-2:]
self.assertTrue(banner.startswith('Traceback'))
self.assertTrue(location.startswith(' File'))
self.assertTrue(source_line.startswith(' raise'))
def test_traceback_format(self):
self.check_traceback_format()
def test_traceback_format_with_cleared_frames(self):
# Check that traceback formatting also works with a clear()ed frame
def cleanup_tb(tb):
tb.tb_frame.clear()
self.check_traceback_format(cleanup_tb)
def test_stack_format(self):
# Verify _stack functions. Note we have to use _getframe(1) to
# compare them without this frame appearing in the output
with captured_output("stderr") as ststderr:
traceback.print_stack(sys._getframe(1))
stfile = StringIO()
traceback.print_stack(sys._getframe(1), file=stfile)
self.assertEqual(ststderr.getvalue(), stfile.getvalue())
stfmt = traceback.format_stack(sys._getframe(1))
self.assertEqual(ststderr.getvalue(), "".join(stfmt))
def test_print_stack(self):
def prn():
traceback.print_stack()
with captured_output("stderr") as stderr:
prn()
lineno = prn.__code__.co_firstlineno
self.assertEqual(stderr.getvalue().splitlines()[-4:], [
' File "%s", line %d, in test_print_stack' % (__file__, lineno+3),
' prn()',
' File "%s", line %d, in prn' % (__file__, lineno+1),
' traceback.print_stack()',
])
def test_format_stack(self):
def fmt():
return traceback.format_stack()
result = fmt()
lineno = fmt.__code__.co_firstlineno
self.assertEqual(result[-2:], [
' File "%s", line %d, in test_format_stack\n'
' result = fmt()\n' % (__file__, lineno+2),
' File "%s", line %d, in fmt\n'
' return traceback.format_stack()\n' % (__file__, lineno+1),
])
cause_message = (
"\nThe above exception was the direct cause "
"of the following exception:\n\n")
context_message = (
"\nDuring handling of the above exception, "
"another exception occurred:\n\n")
boundaries = re.compile(
'(%s|%s)' % (re.escape(cause_message), re.escape(context_message)))
class BaseExceptionReportingTests:
def get_exception(self, exception_or_callable):
if isinstance(exception_or_callable, Exception):
return exception_or_callable
try:
exception_or_callable()
except Exception as e:
return e
def zero_div(self):
1/0 # In zero_div
def check_zero_div(self, msg):
lines = msg.splitlines()
self.assertTrue(lines[-3].startswith(' File'))
self.assertIn('1/0 # In zero_div', lines[-2])
self.assertTrue(lines[-1].startswith('ZeroDivisionError'), lines[-1])
def test_simple(self):
try:
1/0 # Marker
except ZeroDivisionError as _:
e = _
lines = self.get_report(e).splitlines()
self.assertEqual(len(lines), 4)
self.assertTrue(lines[0].startswith('Traceback'))
self.assertTrue(lines[1].startswith(' File'))
self.assertIn('1/0 # Marker', lines[2])
self.assertTrue(lines[3].startswith('ZeroDivisionError'))
def test_cause(self):
def inner_raise():
try:
self.zero_div()
except ZeroDivisionError as e:
raise KeyError from e
def outer_raise():
inner_raise() # Marker
blocks = boundaries.split(self.get_report(outer_raise))
self.assertEqual(len(blocks), 3)
self.assertEqual(blocks[1], cause_message)
self.check_zero_div(blocks[0])
self.assertIn('inner_raise() # Marker', blocks[2])
def test_context(self):
def inner_raise():
try:
self.zero_div()
except ZeroDivisionError:
raise KeyError
def outer_raise():
inner_raise() # Marker
blocks = boundaries.split(self.get_report(outer_raise))
self.assertEqual(len(blocks), 3)
self.assertEqual(blocks[1], context_message)
self.check_zero_div(blocks[0])
self.assertIn('inner_raise() # Marker', blocks[2])
def test_context_suppression(self):
try:
try:
raise Exception
except:
raise ZeroDivisionError from None
except ZeroDivisionError as _:
e = _
lines = self.get_report(e).splitlines()
self.assertEqual(len(lines), 4)
self.assertTrue(lines[0].startswith('Traceback'))
self.assertTrue(lines[1].startswith(' File'))
self.assertIn('ZeroDivisionError from None', lines[2])
self.assertTrue(lines[3].startswith('ZeroDivisionError'))
def test_cause_and_context(self):
# When both a cause and a context are set, only the cause should be
# displayed and the context should be muted.
def inner_raise():
try:
self.zero_div()
except ZeroDivisionError as _e:
e = _e
try:
xyzzy
except NameError:
raise KeyError from e
def outer_raise():
inner_raise() # Marker
blocks = boundaries.split(self.get_report(outer_raise))
self.assertEqual(len(blocks), 3)
self.assertEqual(blocks[1], cause_message)
self.check_zero_div(blocks[0])
self.assertIn('inner_raise() # Marker', blocks[2])
def test_cause_recursive(self):
def inner_raise():
try:
try:
self.zero_div()
except ZeroDivisionError as e:
z = e
raise KeyError from e
except KeyError as e:
raise z from e
def outer_raise():
inner_raise() # Marker
blocks = boundaries.split(self.get_report(outer_raise))
self.assertEqual(len(blocks), 3)
self.assertEqual(blocks[1], cause_message)
# The first block is the KeyError raised from the ZeroDivisionError
self.assertIn('raise KeyError from e', blocks[0])
self.assertNotIn('1/0', blocks[0])
# The second block (apart from the boundary) is the ZeroDivisionError
# re-raised from the KeyError
self.assertIn('inner_raise() # Marker', blocks[2])
self.check_zero_div(blocks[2])
def test_syntax_error_offset_at_eol(self):
# See #10186.
def e():
raise SyntaxError('', ('', 0, 5, 'hello'))
msg = self.get_report(e).splitlines()
self.assertEqual(msg[-2], " ^")
def e():
exec("x = 5 | 4 |")
msg = self.get_report(e).splitlines()
self.assertEqual(msg[-2], ' ^')
class PyExcReportingTests(BaseExceptionReportingTests, unittest.TestCase):
#
# This checks reporting through the 'traceback' module, with both
# format_exception() and print_exception().
#
def get_report(self, e):
e = self.get_exception(e)
s = ''.join(
traceback.format_exception(type(e), e, e.__traceback__))
with captured_output("stderr") as sio:
traceback.print_exception(type(e), e, e.__traceback__)
self.assertEqual(sio.getvalue(), s)
return s
class CExcReportingTests(BaseExceptionReportingTests, unittest.TestCase):
#
# This checks built-in reporting by the interpreter.
#
@cpython_only
def get_report(self, e):
from _testcapi import exception_print
e = self.get_exception(e)
with captured_output("stderr") as s:
exception_print(e)
return s.getvalue()
class MiscTracebackCases(unittest.TestCase):
#
# Check non-printing functions in traceback module
#
def test_clear(self):
def outer():
middle()
def middle():
inner()
def inner():
i = 1
1/0
try:
outer()
except:
type_, value, tb = sys.exc_info()
# Initial assertion: there's one local in the inner frame.
inner_frame = tb.tb_next.tb_next.tb_next.tb_frame
self.assertEqual(len(inner_frame.f_locals), 1)
# Clear traceback frames
traceback.clear_frames(tb)
# Local variable dict should now be empty.
self.assertEqual(len(inner_frame.f_locals), 0)
def test_extract_stack(self):
def extract():
return traceback.extract_stack()
result = extract()
lineno = extract.__code__.co_firstlineno
self.assertEqual(result[-2:], [
(__file__, lineno+2, 'test_extract_stack', 'result = extract()'),
(__file__, lineno+1, 'extract', 'return traceback.extract_stack()'),
])
def test_main():
run_unittest(__name__)
if __name__ == "__main__":
test_main()