曾与蒿藜同雨露,한때 잡초와 쑥과 함께 비와 이슬을 나누던 곳이 이제는 소나무와 삼나무와 함께 서리와 눈을 견뎌내고 있다.终随松柏到冰霜.かつては雑草やヨモギと共に雨や露を分かち合っていたが、今では松やヒノキと共に霜や雪に耐えている。曾与蒿藜同雨露,Once sharing rain and dew with weeds and wormwood, now enduring frost and snow with pines and cypresses.终随松柏到冰霜.曾与蒿藜同雨露한때 잡초와 쑥과 함께 비와 이슬을 나누던 곳이 이제는 소나무와 삼나무와 함께 서리와 눈을 견뎌내고 있다.,终随松柏到冰霜.譖セ荳手珍阯懷酔髮ィ髴イ�檎サ磯囂譚セ譟丞芦蜀ー髴�曾与蒿藜同雨露,鏇句笌钂胯棞鍚岄洦闇诧紝缁堥殢鏉炬煆鍒板啺闇�终随松柏到冰霜.曾与蒿藜同雨露,한때 잡초와 쑥과 함께 비와 이슬을 나누던 곳이 이제는 소나무와 삼나무와 함께 서리와 눈을 견뎌내고 있다.终随松柏到冰霜.曾与蒿藜同雨露,终随松柏到冰霜.
#!/bin/sh
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
[ -d $NEWROOT ] || mkdir -p -m 0755 $NEWROOT
[ -d /run/initramfs ] || mkdir -p -m 0755 /run/initramfs
[ -d /run/lock ] || mkdir -p -m 0755 /run/lock
[ -d /run/log ] || mkdir -p -m 0755 /run/log
if [ -f /dracut-state.sh ]; then
. /dracut-state.sh 2>/dev/null
fi
type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
[ -f /etc/initrd-release ] && . /etc/initrd-release
[ -n "$VERSION" ] && info "dracut-$VERSION"
info "Using kernel command line parameters:" $(getcmdline)
getargbool 0 rd.udev.log-priority=info -d rd.udev.info -d -n -y rdudevinfo && echo 'udev_log="info"' >> /etc/udev/udev.conf
getargbool 0 rd.udev.log-priority=debug -d rd.udev.debug -d -n -y rdudevdebug && echo 'udev_log="debug"' >> /etc/udev/udev.conf
source_conf /etc/conf.d
# Get the "root=" parameter from the kernel command line, but differentiate
# between the case where it was set to the empty string and the case where it
# wasn't specified at all.
if ! root="$(getarg root=)"; then
root_unset='UNSET'
fi
rflags="$(getarg rootflags=)"
getargbool 0 ro && rflags="${rflags},ro"
getargbool 0 rw && rflags="${rflags},rw"
rflags="${rflags#,}"
fstype="$(getarg rootfstype=)"
if [ -z "$fstype" ]; then
fstype="auto"
fi
export root
export rflags
export fstype
make_trace_mem "hook cmdline" '1+:mem' '1+:iomem' '3+:slab' '4+:komem'
# run scriptlets to parse the command line
getarg 'rd.break=cmdline' -d 'rdbreak=cmdline' && emergency_shell -n cmdline "Break before cmdline"
source_hook cmdline
[ -f /lib/dracut/parse-resume.sh ] && . /lib/dracut/parse-resume.sh
case "${root}${root_unset}" in
block:LABEL=*|LABEL=*)
root="${root#block:}"
root="$(echo $root | sed 's,/,\\x2f,g')"
root="block:/dev/disk/by-label/${root#LABEL=}"
rootok=1 ;;
block:UUID=*|UUID=*)
root="${root#block:}"
root="block:/dev/disk/by-uuid/${root#UUID=}"
rootok=1 ;;
block:PARTUUID=*|PARTUUID=*)
root="${root#block:}"
root="block:/dev/disk/by-partuuid/${root#PARTUUID=}"
rootok=1 ;;
block:PARTLABEL=*|PARTLABEL=*)
root="${root#block:}"
root="block:/dev/disk/by-partlabel/${root#PARTLABEL=}"
rootok=1 ;;
/dev/*)
root="block:${root}"
rootok=1 ;;
UNSET|gpt-auto)
# systemd's gpt-auto-generator handles this case.
rootok=1 ;;
esac
[ -z "${root}${root_unset}" ] && die "Empty root= argument"
[ -z "$rootok" ] && die "Don't know how to handle 'root=$root'"
[ "$root" = "UNSET" ] && unset root
export root rflags fstype netroot NEWROOT
export -p > /dracut-state.sh
exit 0